Oxidestuc

We do not recommend it. In principle, it is possible if the wall does not come into contact with water, but we have products that are much more suitable for wet rooms. We therefore advise you to choose Basebeton or Beton Ciré Originale.

We advise you to only use Oxidestuc for walls in dry rooms. The product is too much prone to scratching to use as a floor finish.

You can choose from six wonderful metallic colours: gold, aluminium, copper, bronze, rust and steel.

Yes, the degree to which you sand or polish determines the final sheen. The metallic effect also depends on the coating you use: Basic Wax is shinier than Basic Coat, for example. This allows you to decide for yourself which finish best suits your interior.

Of course. You are very welcome in our showroom. There you can see the different colours and sheens on large samples. That gives a much better impression than a small sample.

You can apply Oxidestuc to almost any substrate. So also over existing tiles. That saves a lot of demolition work. Make the surface smooth, clean and dust-free and apply two coats of Ecohecht. Let it dry for 24 hours.

Use a sanding machine and 120 grit sandpaper. Lightly sand the Ecohecht.

Yes, but it is actually far too beautiful for that. Still want to do it? The substrate does need a pre-treatment and you may still see the microcement structure after it has been painted.

Do not use an all-purpose cleaner, but the maintenance kit of Stone Age. Wipe the surface with a damp cloth. The dirt does not adhere to the coating, so scrubbing is not needed. Never use chlorine or bleach, as these products will damage the coating layer (and therefore your plaster).